1Take apart your digital camera. Remove the screws with a
Phillips-head screwdriver and gently pry the casing apart. If you are using a
webcam, you will need to pry it open with a flat-edge screwdriver.
2 Cut the film negative into two pieces using the scissors. They
should be roughly the size of a quarter. Set these aside.
3 Gently pull the CCD out from behind the lens of the camera. This
is the piece of the camera that is responsible for taking photographs. It is
square in shape and will have a red piece of glass sitting on top of it. This
infrared filter reduces the amount of light that is emitted into the camera.
4 Remove the infrared filter from the CCD by prying it off gently
with a flat-head screwdriver. Use a slow rocking motion to avoid breakage.
5 Glue the film negatives together and glue them to the CCD using
the super glue. Wait about 20 to 30 minutes for this to dry.
6 Put the digital camera back together by replacing the screws. If
you are using a web camera, you may have to put it back together by using glue
if it has no screws.
7 Wait until it is dark and take some photos. The pictures will
appear washed out and colorless, but will produce clear photographs from
thermal images, not light.
No comments:
Post a Comment